6.5 HP 4-Stroke Outboard Motor 123 cc Fishing Boat Water-Cooled Gasoline Short Shaft Heavy-Duty Outboard Engine with CDI Ignition System for Fishing Boats Motorboats Inflatable Boats Yachts

DetailsWater Baffle: The water baffle above the propeller effectively reduces wave tossing and avoid water from wetting your clothes.Fuel Tank: The 3.2gal fuel tank avoids frequent refilling. The handle on the fuel tank makes it easy to move and carry around individually.ApplicationThis product is suitable for small boats(such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats), and is applicable to water operations in rivers, lakes, reservoirs, fish ponds, etc. SpecificationsMaterial: Plastic, Aluminium Alloy Color: BlackType: 4-stroke 6.5 HPDisplacement: 123CCGear Ratio: 2.08(27:13)Cylinder: 1Max.Output: 4.8kwRotation: 5000-6000r/minSpeed: About 10-20km/h(6.2-12.42Miles/h) (Depending on the Environment, Water Area, and Ship Load, the Speed may Vary)Gear Positions: F-N-RIgnition System: CDICooling System: Water-coolingControl System: Tiller ControlStarting System: Manual StartControl System: #93 GasolineRecommended Propeller Range: 7.6-17.7 x 22.8cm/3-7in x 9inRecommended Lubricant: Four Stroke Lubricating OilMixing Ratio: Pure GasolineTrim and Tilt System: Manual TiltFuel Consumption: About 2L/H (0.52gal/H)Standard Fuel Tank Capacity: 12L/3.2galShort Shaft: 40cm/15.74inClamping Width: 4cm/1.57inBore x Stroke: 59x45mm/2.32x 1.77in Clamp Size: 7x13cm/2.76x 5.12in Clamping Range: 0-4cm/0-1.57inHandle Length: 34cm/13.39inEngine Head Size: 39x23x 25cm/15.35x9.06x5.91inFuel Tank Size: 34x22x 24cm/13.39x8.66x9.45inSilencer Size: 41x25cm/16.14x 9.84inch Outboard Height: 102cm/40.16inchFuel Tank & Pipe Net Weight: 2.3kg/5.07lbsFuel Tank & Pipe Gross Weight: 2.75kg/6.06lbsOutboard Gross Weight: 29.05kg/64.04lbsOutboard Net Weight: 24.95kg/55lbsFuel Tank & Pipe Package Size: 40x31x 30.5cm/15.75x12.2x12inchOutboard Package Size: 64x38.5x 111cm/25.2x15.16x43.7inchThrust Force: 300-750kg/661-1653lbsPackage Included1x Outboard Engine1x Oil Pipe1x Funnel1x Fuel Tank1x English User ManualAll Accessories for InstallationNotes1. When there is no water coming out of the motor, stop using it immediately and then check the pump impeller or check that the outlet is not blocked.2. Please don't start the motor on the shore without water. Even if you want to test the motor, it should be done in the river!3. After using in salt water, it is recommend to wash it with clean water immediately.4. Please add gear oil to the gears before using the motor and change the gear oil after the break-in period (10 hours). After the break-in period, you will need to change the gear oil again after 100 hours of operation.5. We can only provide CE certification, there is no other certification that can be provided, thanks for your understanding.6. About the noise: all petrol engines have noise. Currently, we have not tested the decibels, but the noise is the same as a motorbike, so this is normal.7. The machine itself is very light and can be used on board with a weight of 100 kg or less. It can carry up to 4 people, but the speed is certainly not the same when one person is on it or when 4 people are on it. Customers with high expectations of speed, please take note.8. Please note that you have to prepare a boat-motor stand or Hanging board on your boat9. Please do not start the motor on the cylinder bank or use the motor when stopping water discharge, so as to avoid scratching the cylinder10. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. 11. Please note that the exact speed of travel depends on the shape of your boat, weight, water, wind, and other factors.12. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• 【6.5HP Powerful 4-Stroke Performance】This Outboard Motor delivers 4.8kw power (5000-6000r/min) and Bore x Stroke: 59 x 45mm/2.32 x 1.77in and can drive 6.2-12.42 miles per hour .The 123cc displacement and can manually control steering and tilting flexibly with the handle. The reverse gear is also available for your steering convenience. ideal for small boats(fishing, inflatable, or iron boats). Perfect for fishing, aquaculture, or outdoor adventures.
• 【Water Cooling & Efficient Heat Dissipation】Equipped with a water cooling system and uniform cooling holes, this Underwater Outboard Motor prevents overheating. Ensures smooth, safe operation even during extended use. The CDI ignition system enables quick starts for hassle-free boating.The water baffle above the propeller effectively reduces wave tossing
• 【3.2Gal Large Fuel Tank】 The outboard motor's external fuel tank holds 3.2 gallons of fuel to support your long-term operation. The high-efficiency carburetor burns fuel more efficiently, consuming only 0.52 gallons per hour, saving you fuel and making your sailing experience more enjoyable.
• 【Flexible Control & Easy Installation】Twist the ergonomic handle to adjust speed; manually control steering and tilting flexibly with the handle. The reverse gear is also available for your steering convenience. The step-less speed regulation allow you to easily adjust the running speed, combined with simple gear shifting (forward, neutral, or reverse), bringing you a more comfortable and convenient user experience. The switch cannot be pulled when the machine is in forward or reverse to prevent danger and machine damage.
• 【Durable Aluminum Build】Crafted from aluminum with plastic spraying, this Outboard Motor resists corrosion. Foam packaging protects it during transport. Suitable for surf, life-saving, or aquaculture—ideal for boaters seeking reliability and power. The outboard is suitable for rubber boats, inflatable boats, fishing boats, sailboats, yachts, canoes, kayaks, rubber boats, aluminium alloy boats, etc. with a stern height of 17.32 inches or less, to assist in aquaculture, water transportation, netting, luring, outboard backup, outing, and river cleaning/maintenance.