Yost Vises 32C Combination Vise | 4.5 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise | Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

The Yost Vises 32C 4.5" combination pipe and bench vise with 360-degree swivel base mounts to a workbench to provide heavy-duty clamping action, meets Federal Specification GGG-V-410B Type IV, and is made in USA. The ductile iron body has a 360-degree swivel base that adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The top jaws and pipe jaws are made of hardened steel, are grooved for enhanced grip, and can be replaced when worn. The pipe jaws are set back to prevent interference with the use of the top jaws and can be adjusted both horizontally and vertically, customizing the grip for each pipe to prevent marring, crushing, and bending. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise.The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. The base has four 0.65"-diameter holes for mounting hardware (not included).SpecificationsJaw width (nominal)4.5"Jaw opening (nominal)6"Throat depth (nominal)5"Pipe capacity0.125" to 3.5"Overall dimensions*10 x 7.5 x 17 inches (H x W x D)Weight67 lb.*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Vises use the clamping action of jaws to hold a workpiece in place for applications such as drilling and sawing. Vise styles are categorized by how the device is mounted. For example, bench vises mount to a benchtop; drill press vises bolt to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise's jaw opening and throat depth should be large enough for the workpiece.Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.

• COMBINATION VISE: The Yost Vises 32C 4.5-inch utility combination pipe and bench vise is made from a 65,000 PSI Tensile Ductile Iron body. Has hardened replaceable steel pipe jaws as well as steel serrated jaws and continuous rolled thread on main screw.
• TECHNICAL SPECS: Jaw Width 4.5" (11.4 cm), Jaw Opening 6" (15.24 cm), Throat Depth 5" (12.7 cm), Min Pipe Capacity .125" (0.3175 cm), Max Pipe Capacity 3.5" (8.89 cm).
• YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use.
• SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.
• WARRANTY: Comes with a 1-year limited warranty and 90-day return.